image
image
image
imageimage
image

image

 

 

CBY-001.5 1.5 Gundam

 

image image image

Normal mode

Standby mode

image

 

CB-001.5 1.5 Gundam

 

General and Technical Data

 

Model number: CBY-001.5

Code name: 1.5 Gundam

Unit type: prototype Innovade use mobile suit

Manufacturer: Innovators

Operator: Innovators

Rollout: AD 2312
First deployment: unknown

Accommodation: pilot only, in standard cockpit in torso
Dimensions: head height 23.3 meters

Weight: max gross 68.9 metric tons
Armor materials:
E-Carbon

Powerplant: GN Drive Tau, power output rating unknown

Propulsion: GN verniers, total output unknown

Equipment and design features: sensors, range unknown

Fixed armaments: 2 x Large GN Beam Saber, mounted on forearms, hand-carried in use; GN Shield, mounted on left forearm; 2 x binder rifle, swing under shoulders in use, mounted on binders; Alvaaron cannon, mounted on binders

Optional hand armaments: GN Buster Rifle

 

Technical and Historical Notes

 

After Beside Pain's CBY-001 1 Gundam was severely damaged in a battle with Fon Spaak's GNY-001F Gundam Astraea Type F, he used a secret factory in an orbital elevator to upgrade the suit into the CBY-001.5 1.5 Gundam. The upgrades increased the suit's performance in all areas by 1.5 times. Its moveable binders, based on the GNMS-XCVII Alvaaron, were connected directly to the GN Drive Tau. The binders mounted beam rifles, which were positioned under the shoulder armor when in use. The binders could also be used to enhance the 1.5 Gundam's performance, including a defense mode where the binders were sandwiched between the GN Shield to deploy an enhanced GN Field along the shield's surface. In attack mode, the binders' GN particle control capabilities enhanced the power of the GN Buster Rifle. In flight mode, the lower two-thirds of the binders folded outward at 90 degrees, allowing them to serve as wings. In high speed mode, the binders were positioned behind the GN Drive Tau, and the efficient control of the drive's GN particles allowed for high-speed flight. In standby mode, both binders were positioned on one side of the suit: to left for defense, to the right for offense. In Alvaaron cannon mode, the binders were positioned over the shoulders and acted as beam cannons. Due to the heavy use of GN particles, the Alvaaron cannon had a limit of about two uses per sortie.

 

Miscellaneous Information

 

Pilot: Beside Pain, Leif Recitativo

Appearances: Mobile Suit Gundam 00V Battlefield Record; Mobile Suit Gundam 00P; Mobile Suit Gundam 00I

Original mechanical designer: Kanetake Ebikawa

 

Lineart

 

GN Buster Rifle

 

image
image

 

image

image

image

image

image

image
image
image
imageimage