image
image
image
imageimage
image

image

 

 

RX-121-1 Gundam TR-1 "Hazel Custom"

 

rx-121-1

 

General and Technical Data

 

Model number: RX-121-1
Code name: Gundam TR-1 "Hazel Custom"
Unit type:
prototype mobile suit
Manufacturer: Earth Federation Forces (Confeito Arsenal)
Operator: Titans Test Team (Black Otter Team)
First deployment: October UC 0085
Accommodation: pilot only, in panoramic monitor/linear seat cockpit in torso
Dimensions: overall height 18.1 meters
Weight: empty 41.5 metric tons; max gross 63.0 metric tons
Armor materials: titanium alloy ceramic composite; Luna Titanium alloy
Powerplant: Minovsky type ultracompact fusion reactor, output rated at 1,420 kW (+390 kW)
Propulsion: rocket thrusters: 114,480 kg total (18,000 kg, 2 x 27,000 kg, 2 x 17,500 kg, 4 x 1,870 kg)
Equipment and design features: sensors, range 10,200 meters; movable booster pod
Fixed armaments: beam saber, mounted on backpack storage rack, hand-carried in use; shield booster, mounted on left arm
Optional fixed armaments: multipurpose weapon latch
Optional hand armaments: XBR-M84a beam rifle

 

Technical and Historical Notes

 

After Wes Murphy's Gundam TR-1 "Hazel" was heavily damaged in combat with Zeon remnants, it was repaired and improved using a RGM-79Q GM Quel stationed at Confeito and spare Hazel parts stored aboard the Aswan. This "Hazel Custom" reflected the combat data and development know how accumulated by the original Hazel. The machine's enhancement parts, which previously seemed like an afterthought, were better balanced with the other parts and the machine's internal structure to make it a more complete mobile suit. As a result, its external appearance had a more unified feel, and its lighter weight and increased thruster output gave it roughly 10 percent greater acceleration. A 360-degree panoramic monitor and linear seat system were installed in its cockpit on an experimental basis, and its operating system was also upgraded, so this machine's operation was greatly advanced from the original Hazel. Because the Hazel's unique shield boosters were lost in its previous battles, the Hazel Custom was equipped with a normal shield. The loss of the shield boosters admittedly reduced the Hazel Custom's mobility, but its overall performance increase was enough to make up for this. Due to its redeployment schedule there wasn't time to repaint the machine in Titans colors, so most of its armor remained the grey color in which it was molded.

 

The Hazel Custom's basic specs, including its generator and thruster performance, were similar to those of the GM Quel. Its leg sections housed thermonuclear rocket engines with an output of 17,500 kg apiece, and its backpack was equipped with the same movable booster pod as the original Hazel. The thermonuclear reactor inside this pod served as both a supplemental generator and a hybrid jet/rocket engine, with an output of 390 kW and 18,000 kg, respectively. The Hazel Custom retained the support actuator units and enhancement parts of the original Hazel, and could carry all the same equipment. A multi weapon latch could be plugged into its center skirt armor to support options like a sub arm unit or a flexible beam rifle unit, and another multipurpose latch was located above its cockpit hatch. While the Hazel Custom's High Mobility Form was identical to that of the original Hazel, its Assault Form was equipped with the same booster pod used by the RMS-117 Galbaldy-β High Mobility Unit, rather than the Hazel's usual movable booster pod. Two shield boosters were attached to this booster pod, and the mobile suit was also equipped with the Galbaldy-β's extendable shield.

 

Miscellaneous Information

 

Pilot(s): Wes Murphy, Eliard Hunter
Appearances: Advance of Zeta: The Flag of Titans
Original mechanical designer: Kenki Fujioka

 

Lineart

 

Booster pod movement
Movable booster
Weapon latch

 

image
image

 

image

image

image

image

image

image
image
image
imageimage