image
image
image
imageimage
image

image

 

 

GNZ-005 Garazzo

 

image image image

Revive Revival colors

Hiling Care colors

image

 

GNZ-005 Garazzo

 

General and Technical Data

 

Model number: GNZ-005

Code name: Garazzo

Unit type: Innovade use close combat mobile suit

Manufacturer: Innovators

Operator: Innovators

Rollout: unknown
First deployment: AD 2312

Accommodation: pilot only, in standard cockpit in torso using Core Fighter
Dimensions: head 24.8 meters (normal mode), 21.4 meters (ground mode)

Weight: max gross 60.4 metric tons
Armor materials:
E-Carbon

Powerplant: GN Drive Tau, power output rating unknown

Propulsion: GN verniers, total output unknown

Equipment and design features: sensors, range unknown; Trans-Am System (later modification); 2 x GN Condenser, mounted in shoulders

Fixed armaments: 2 x GN Beam Claw, mounted as fingers, can function as 10 x GN Beam Saber; 2 x GN Vulcan Gun, mounted in wrists; 6 x GN Cutter, GN Shield, mounted on left shoulder; 2 x GN Cutter, mounted on protrusions on forearms; 14 x GN Spike, mounted across main body

Optional hand armaments: none

 

Technical and Historical Notes

 

The GNZ-005 Garazzo was an Innovator/Innovade use mobile suit that was part of the GNZ series. Like the GNZ-003 Gadessa, the Garazzo was developed using Gundam data from Veda, making the machine's performance comparable to the Gundams. The Garazzo also used the same Core Fighter as other GNZ suits. The Garazzo's forehead black lines housed a search monoeye. Like the Gadessa, the Garazzo was later capable of using the Trans-Am System and had the same problem of the GN Drive Tau entering a halted state after Trans-Am. Thus, spare particles were present in the GN Condenser for the return trip to replace the GN Drive Tau. The suit received backup from Veda, and thus had higher performance than normal mobile suits. The Garazzo's armaments included GN Vulcan Guns and two GN Beam Claws in the fingers that could also operate as 10 GN Beam Sabers. The Garazzo's hands were 1.5 times bigger than the Gadessa's as the fingers contained the generator for the beam saber/claw. A GN Shield was mounted on the Garazzo's left arm. The Garazzo could not use its GN Field too often as the GN particle consumption was too high for the GN Drive Tau. Besides the fins on the arms serving as GN Cutters, the spikes all over the body could function as GN Spikes through the deployment of a thin layer of GN Field on their surface. A protective visor slid up during combat to protect the Garazzo's eyes. The Garazzo was used by several Innovades in 2312 during the conflict with the reconstituted Celestial Being.

 

Miscellaneous Information

 

Pilot(s): Bring Stabity, Hiling Care

Appearances: Mobile Suit Gundam 00; Mobile Suit Gundam 00I; Mobile Suit Gundam 00P

Original mechanical designer: Takayuki Yanase

 

Lineart

 

Cockpit

Cockpit hatch

Core Fighter

GN Beam Claw/Saber

Leg

 

image
image

 

image

image

image

image

image

image
image
image
imageimage